Product Categories
Home / Shop New Tools
Shop New Tools For Sale
Showing 3681–3760 of 5972 results
-
Quick ViewSidchrome 9 Piece Socket Set, 1/2″ Drive 3/4″5/8″9/16″1/2″7/16″3/8″5/16″1/4″3/16″
$105.00 -
Quick ViewSidchrome 7pc Wad Punch Set
$58.00 -
Quick ViewSidchrome 3/4" Socket Set, The Ratchet Has Been Sold That Is In The Photo, 2 3/16, 1 7/8, 1 13/16, 1 3/4, 1 11/16, 1 9/16, 1 1/2, 1 7/16, 1 5/16, 1 3/8, 1 3/8, 1 1/8, 1 1/16, 1, 15/16, 13/16, And Ball Joint, These Have Some Rust But All Just Need
$335.00 -
Quick ViewSidchrome 2207 Af Socket Set, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8".
$60.00 -
Quick ViewSidchrome 1/2" Drive Swivel Joint.
$24.00 -
Quick ViewSidchrome #42017 Wheel Brace.
$35.00 -
Quick ViewShumate St.Louis Usa Extra Fine Sharpening Stone 2 X 5".
$60.00 -
Quick ViewShort Bent Gouge Carving Chisel7Mm, Good Handle.
$35.00 -
Quick ViewShelton Usa 118 Block Plane,
$69.00 -
Quick ViewShelton No 4 USA Base
$16.00 -
Quick ViewShelley 6" Vintage Wrench, Very Good Maker.
$46.00 -
Quick ViewShell #S-5 Side Cutter Pliers.
$22.00 -
Quick ViewSheffield UK 11" Fencing Pliers
$36.00 -
Quick ViewSheffield Small Steel, 7 1/2" Long.
$24.00 -
Quick ViewSheffield Gents Saw, 7", Extra Fine.
$46.00 -
Quick ViewSheffield Brass And Rosewood Marking Guage, This Is From The Same Estate, The Brass Has Some The Orginal Finish, Never Cleaned, Has Part Makers Name.
$95.00 -
Quick ViewSheedme Tool Co Usa Boot Stretcher.
$60.00 -
Quick ViewSharpening Stone super Fine
$65.00 -
Quick ViewSharpening Stone super Fine
$85.00 -
Quick ViewSharpening Stone super Fine
$95.00 -
Quick ViewSharpening stone holder up to 8″ long stones
$40.00 -
Quick ViewSharpening slip stone iob, 4 1/2″ long
$18.00 -
Quick ViewSharpening 8 x 2" iob
$16.00 -
Quick ViewShardlow Micrometer 1 – 2" little used iob
$45.00 -
Quick ViewShapleigh Hardware 6" Square, Unusual Design Features.
$44.00 -
Quick ViewShapercraft USA Dowel Jig, IOB
$59.00 -
Quick ViewSet Soldering Irons, All Different.
$48.00 -
Quick ViewSet of Spade bits largest 1"
$35.00 -
Quick ViewSet of 3 Good Quality Split Chucks
$155.00 -
Quick ViewSet Of 3 Fancy Molding Planes, 1, 1 1/2.
$145.00 -
Quick ViewSet of 2 mini square pins, nice
$35.00 -
Quick ViewSet 5, Very Hard To Get These, 25, 20, 15, 12, 10Mm.
$45.00 -
Quick ViewSet 3 Trowels, Cenurion Italy Largest, Unmarked Middle, Praco Smallest.
$40.00 -
Quick ViewServex #X132F Pinion Bearing Adjusting Gauge, Food Tool #Axg 4621.
$145.00 -
Quick ViewSensor Plug Test Tool
$12.00 -
Quick ViewSelections From The Chronicle, The Fascinating World Early Tools, Trades & Technology, Hardcover, 407 Pages, 9 1/2 X 6 1/2″.
$55.00 -
Quick ViewSEK Hex Bit Socket/Wrench Set, 3/8”Dr, 7pc,
$48.00 -
Quick ViewSeiberling Tyre Thread Gauge.
$35.00 -
Quick ViewSeezac Usa 1/2 Micrometer.
$45.00 -
Quick ViewSeeger Sortiment O-Ring Set, Not Complete But Enough To Keep You Busy.
$38.00 -
Quick ViewSecurity sockets 11 assorted made in taiwan,
$18.00 -
Quick ViewSecodex HR175.10 325 Lathe Turning Tool
$65.00 -
Quick ViewSecodex CL 174 10-1925 Lathe Turning Tool
$62.00 -
Quick ViewSeco S40U-Ptfnr22 Boring Bar 35Mm Bar, Heavy And Long.
$105.00 -
Quick ViewSeco R216.19.00.50-3 Boring Bar.
$60.00 -
Quick ViewSeco Parting tool Tips
$9.00 -
Quick ViewSeco Lathe Tool Holder CTFPR 2525-16
$65.00 -
Quick ViewSeco Lathe Tool Holder CTFPR 2525-16
$70.00 -
Quick ViewSeco Boring BarS20R Ctfpr-16, Uses Tpmr Inserts, 19Mm Wide, Approach Angle 90 Deg.
$110.00 -
Quick ViewSears USA machine scribe
$18.00 -
Quick ViewSears Usa Complete Number Set 1/8" Iob.
$52.00 -
Quick ViewSears Usa 4Pc Telescoping Gauge Iob, 5/16- 2 1/8".
$85.00 -
Quick ViewSears Usa 3/16" Number Set.
$55.00 -
Quick ViewSealed Power Corp HKS CO cutting tool,
$75.00 -
Quick ViewSds Drill Bit Set, Long At 20" Long, 10, 12, 16, 22 & 25Mm.
$145.00 -
Quick ViewScriber & dividers 8″ long maker worn
$22.00 -
Quick ViewScrew Thread Raplacment Faces $12 Each, 1 1/4" & 1 1 3/4".
$14.00 -
Quick ViewScrew Starters, Aluminum Is Snap On Phillips, Others Are Straight Not Marked But Were Bought Together.
$55.00 -
Quick ViewScrew Box 9/16".
$85.00 -
Quick ViewScrew Box 7/8" Maker Worn, No Tap.
$60.00 -
Quick ViewScrew Box 5/8", Maker Worn, No Tap.
$70.00 -
Quick ViewScrew box 1/2", no tap
$65.00 -
Quick ViewScrew Box 1/2" Maker Worn, Owners Marks, No Tap.
$60.00 -
Quick ViewScratch Awl, Metal Handle.
$24.00 -
Quick ViewScotch Code Std-0-9 Wire Marker.
$20.00 -
Quick ViewScissors, 160mm long,
$19.00 -
Quick ViewSchollhorn USA Crimping pliers
$26.00 -
Quick ViewSchollhorn Pliers, Very Large Size 8 1/2", Patent 1913, Heavy Duty, Hard To Find This Size.
$75.00 -
Quick ViewScholhorn Bernard’s Patent Plier, 6 1/2" Long.
$35.00 -
Quick ViewScholhorn Bernard patent 4" punch pliers
$22.00 -
Quick ViewScherr Tumico 2 – 3″ Micrometer
$85.00 -
Quick ViewSchere-Tumico 5″ vernier calliper, USA
$48.00 -
Quick ViewSccherr-Tumico 0 – 1″ locking micrometer
$48.00 -
Quick ViewSaxon Very Small, 9 Long Head. A
$19.00 -
Quick ViewSawset, Maker Worn.
$16.00 -
Quick ViewSawset Pat, 1880, 1887, Dec 2 90.
$20.00 -
Quick ViewSawset Maker Worn.
$16.00 -
Quick ViewSawset Maker Worn.
$16.00 -
Quick ViewSawset Maker Worn.
$16.00













































































