These will get you set up in No Time, Sandvik No 10 Sliding Clamps, 290mm x 150mm, Priced For The Pair, M7921m
Brook Stone USA 12" Brass Jewellers Clamps Set of 2, Very Clean, M13961
Vintage small bench vice, 1 1/8" wide jaws, tiny cut in side of jaw, so nice for a small vice
Vintage pair of miniature tool makers vices, overall 80mm long x 20mm wide, as new
Very small ball vice on steel plate, round base about 25mm x 50mm high
Vintage timber turnscrew vice, a little chipping on threads, 16" long
Hasting small vice that also does round stock, 4" long great little vice
Superb Timber,Brass and Steel hand vice, 50mm jaws
Large Lot of name brand clamps including German F clamps
Jeweler's hand vise/clamp 1/4" jaws, some makers mark
Jeweler's hand vise/clamp 3/8" jaws, some makers mark
Vintage Jewelers Small timber handle hand vice, 4mm jaws
D & D Fantastic Vice With Anvil, Great Design, 1 3/4" Jaws.
Fantastic Miniature Vice, When Only The Best Will Do, Makers Name Readable, Patent 1885, Anvil On Top Also.
Jet 3/4" Long Pipe Clamp New Old, These Do Not Include The Pipe.
L H & F Co #1 Small Bench Vice, 1 3/4" Jaws With Anvil.
Lehigh Vice With Anvil, Fantastic Little Vice.40Mm Jaws.
M Marked Small Vice, 2 1/2" Jaws With Anvil On Back.
Millers Falls Small Hand Vice, Rosewood With Screw Off Cap, Fine.
Millers Falls Usa Small Swivel Vice, Real Nice One, Complete, 2 1/2" Jaws.
Miniature Vice With Small Anvil, Some Pitting, Nice Early One Marked 1.
Rare Yankee 991 And 199 Swivel Base, 1 1/2" Jaws, It Locks With A Cam Action.
Small Bench Vice, Early Model, 1 7/8" Wide Jaws, Tiny Hole Drilled In Jaws But Does Not Effect Useready To Use.
Best Small Vice I Have Fered For Sale, Perfect Cone Anvil On Side To A Point, 1 3/4" Jaws Serrated, As Good As They Come.
Stanley #743Sw Bench Vice With Anvil, 2 1/4" Jaws, Jaws Show A Little Wear.
Stanley #80-209 Bench Vice With Anvil, 2 1/2" Jaws.
Stanley #H1209 Bench Vice, 2 1/2" Jaws, With Paper Decal.
Stanley Sw #745 Fantastic Vice With Anvil, Great Design.
Stanley Sweetheart Victor No. 745 Clamp On Bench Vise In Working Condition. It Is 6" Tall And The Jaws Are 2 1/2"Wide. ItIs Marked Stanley Tm Sw New Britain, Conn UsaVictor No. 745 U.S. Pat7-28-08 On The Rear The Vise. The Anvil On The Rear Has The Tip Chipped F. There Are Nicks And Scratches On The Top The Jaws. It Weighs 5 Lbs 8 Ozs. Overall In Good Working Condition.
The Brink Dotten Tool Co Bench Vice With Part Decal, 2 1/2" Wide Jaws, With Anvil.
Tiny Miniature Vice, Jaws Are 1 1/8", Vice Is 3" Long.
Tool Maker Machinist Sine Vice, 6" Long As New Condition.
Universal Trader Rb No 25828 200Mm Parallel Clamp, Very Heavy Duty.
Victor Jersey No. 743 Stanley Clamp Bench Vise. The Top The Jaws Have Nicks And Dings From Being Used. It Is Marked Victor Jersey No. 743 Stanley Rule & Level Co New Britain, Conn Usa Pat'D Jan 28, 08. It Is 5 1/2" Tall And Weighs 3 Lbs 13 Ozs. The Jaws Are 2" Wide. It Has A Small Anvil On The Rear The Vise.
Vintage Jeweler's Hand Vice, 1/4" Jaws, Nice And Early.
Vintage Jewelers Hand Vice, 3 1/2" With Maker, Hard To Read.
Vintage Jeweler's Hand Vice, 3/16" Jaws, Nice And Early.
Vintage Jeweler's Hand Vice, 5mm Jaws, Nice And Early.
Vintage Jeweler's Hand Vice, 7mm Jaws, Nice And Early, 1875 Patent, Just About Perfect.
Vintage Jeweler's Hand Vice, 7mm Jaws, Nice And Early, 1875 Patent, Smaller Than Other One.
Vintage Miniature Vice With Anvil, 1 1/8" Wide Jaws.