|
Taps, Dies, Handles, Sets |
||
|
All single taps are quality taps by Sutton, P & N, or other UK or USA makers |
||
 |
#1113 | Brass Taps - 3/16, 5/16, 3/8, 7/16 all $10 each, 1 brass Die Nut 3/8" 3/4" diameter $10 |
 |
#1114 | BSF Taps - 1/4, 3/8 all $7 each |
 |
#1115 |
Metric Taps
- 20 x 1.5 $10, M16, M14, 12 x 1.75, 12 1.5, 10 x
1.25, 10 x 1.0, 9 x 1.0, 8 x 1.25, m8, m8 x 1.25 spiral,
m7, 6 x 1.0, m6, 5 x .8, m4, 3 x .5, all these are $5 each |
 |
#1019 | P & N 24mm x 3.0 metric tap. A$ 18 |
 |
#1116 | NF Taps - 7/8" $15 1/2, 3/8, 7/16, 10 x 32, 2 x 64, 0 - 80 all these are $5 each |
 |
#1117 | NC Taps - 3/8" long tap $10, 5/8, 1/2 - $5 each, 5/8 new sutton tap $ 10, 7/16, 5/16, 3/8" all the others $3 each |
 |
#1118 | NC Taps - 5/16 spiral $5, 1/4, 12 x 24, 10 x 24, 8 x 32 spiral, 8 x 32, 6 x 32, 3 x 48, all the others $3 each |
 |
#1119 | BSP Taps - 1/2, 3/8, 1/4, 1/8 all $5 each some are bspp, bsp , bspt, |
 |
#1120 | Whitworth Taps - 5/8, 9/16, 1/2, 7/16, 3/8, 5/16, 1/4, 5/32, 3/16, 1/8 all $5 each |
| #1121 | BA Taps - all $5 each | |
 |
#1072 | Craftsman Tap Handle # 4067 1/4 - 1/2" taps. FINE A$ 35sold IM |
 |
#1390 | Stanley Ratchet Tap Handle 251A. G++ A$ 25 |
 |
#1073 | Stewart Tap Handle 3/8 - 5/8" shank taps. A$ 22 |
 |
#1074 | Tap Handle 1/4" - 5/8" shank taps. A$ 16 |
 |
#1563 | P & N Australia #329 Tap Wrench IOB, Capacity 3/8". A$ 28 |
 |
#1075 | Stewart Tap Handle 3/8 - 5/8" shank taps. A$ 22 |
 |
#1076 | Tap Handle 1/4" - 5/8" shank taps. A$ 16 |
 |
#1077 | Jackson Tap Handle 1/8" - 1/4" shank taps. A$ 16 |
 |
#1078 | P & N 1/4" Tap Handle. A$ 16 |
 |
#1079 | Minimax 3 - 6mm Tap Handle. A$ 12 |
 |
#1080 | Tap Handle 1/8" - 1/4" shank taps. A$ 12 |
 |
#1081 | Die Handle 1 1/2" round Dies. A$ 12 |
 |
6" Long T Handle Tap Wrench. A$ 16 9" long A$ 18 | |
 |
2" Round Die Holder as new. A$ 22 | |
 |
H72 | P & N Tap Handle, 1/4". A$ 16 |
 |
H42a | T Handle Tap Wrench. A$ 22 |
 |
H44a | Stewart T Handle Tap Wrench. A$ 16 |
 |
H45a | T Handle Tap Wrench. A$ A$16 |
 |
Whitworth taps 8pc, similar sizes. A$ 25 | |
 |
#1302 | Blue Point Snap-on Tap & Die Set IOB, nc & nf. A$ 115 |
 |
U390A | P & N Australia 12pc Whitworth Tap & Die Set, G+. A$ 90 |
 |
U393 | Metric Tap & Die set 20 pc, made in Japan. A$ 30 |
 |
4F | Heli-coil tap, 5/16" - 18fin, Aust made. A$ 15 |