|
 #1877
Stanley Sign, 17 1/2" long and 4 3/4" wide, hard plastic, I do
not know what they are off, hard to find and get. A$ 35 each
 #3006 Stanley #702 Aluminium Alloy
Portable Vice, 3 1/2" jaw capacity, little used, box is rough. A$
36
 #1870 RARE
Miniature Blacksmith Vice, all in working Condition, approx 20" long, could have been a salesman sample as I
have never seen one of these. A$ 395 >
 #2089 Quickset Quick Action Vice, patent pending, looks like the screw and all fittings are
copper, 3" jaws, super vice. A$ 125
 #2779 Presntiss Vice Co Small Vice, this is the top of the range of small vices, 2" jaws. A$
110
 #2787 Panavise USA Swival Carver Vice
,63mm jaws. A$ 95
 #2786 Palmgren # XO Miniature Compound vice, 38mm jaws. A$ 75
 #2785 Fantastic Miniature VIce, when only the best will do, makers name readable, patent
1885, anvil on top also. A$ 125
 #2334 Palmgren Engineers Vice, just under 2 1/2" wide jaws.
G+++ A$ 55
 #1722 RARE Wilton USA Bullet Vice, 2 1/2" jaws. A$ 135 in
black or in gray
 #1602 Yankee #991 Small Vice, 1 1/2" jaws. A$
36
 #1601 Stanley Small Vice, 1 1/2"
jaws. A$ 36
 #1561 Early
Jeweler's Vice, 2 1/4" jaws. A$ 75
 #1314 Eron Angle Vice
unused in the original box. A$ 110
 #1026 RARE Scissor type clamp. A$ 65
#8947 Small Swivel Vice by Supercraft, 60mm jaws. A$
25
#8789 D & D Fantastic Vice with anvil, great design, 1 3/4" jaws.
A$ 45
#8790 Miniature Vice on steel plate, 7/8" jaws. A$
32
#5322 Millers Falls Small Hand Vice, rosewood with screw off cap,
FINE. A$ 75
#8273 Japan small vice with anvil, 3" jaws . A$
28
#8788 Stanley SW #745 Fantastic Vice with anvil, great design. A$
85
#7812 Stanley H157 6" USA pair of clamps, new old stock. A$
25
#7483 Extra Large Ridgid Pipe Vice #E626, over 12" long. A$
75
#7199 Kant-Twist 3 # 67410 USA Clamp, copper ends. A$
35
#6501 Universal Trader RB No 25828 200mm parallel clamp, very heavy
duty. A$ 35
#6708 Lehigh Vise with anvil, fantastic little vice.40mm jaws. A$
65
#6580 STANLEY SWEETHEART VICTOR NO.
745 CLAMP ON BENCH VISE IN WORKING CONDITION. IT IS 6" TALL AND THE JAWS ARE 2 1/2"WIDE. IT IS MARKED
STANLEY TM SW NEW BRITAIN, CONN USA VICTOR NO. 745 U.S. PAT 7-28-08 ON THE REAR OF THE VISE. THE
ANVIL ON THE REAR HAS THE TIP CHIPPED OFF. THERE ARE NICKS AND SCRATCHES ON THE TOP OF THE JAWS. IT WEIGHS 5
LBS 8 OZS. OVERALL IN GOOD WORKING CONDITION. A$ 95
#4832 Carba-Tec Clamp, not sure what used for. NEW A$
16
#6023 Nice #2 Small Bench Vice. A$
35
#6117 VICTOR JERSEY NO. 743 STANLEY CLAMP
BENCH VISE. THE TOP OF THE JAWS HAVE NICKS AND DINGS FROM BEING USED. IT IS MARKED VICTOR JERSEY NO. 743
STANLEY RULE & LEVEL CO NEW BRITAIN, CONN USA PAT'D JAN 28, 08. IT IS 5 1/2" TALL AND WEIGHS 3 LBS 13
OZS. THE JAWS ARE 2" WIDE. IT HAS A SMALL ANVIL ON THE REAR OF THE VISE. A$
85
#5144 Extra Large Screw Clamps. A$
35
#4664 D & D Miniature Vice with anvil. A$
28
#4419 Early Vice with anvil, some rust. A$
35
#3707 Small Bench Vice with Anvil, 2" wide jaws. A$
45
#3635 Miniature Vice with anvil, jaws are 1" wide. A$
36
#3320 Tiny Miniature Vice, jaws are 1 1/8", vice is 3" long. A$
26
#3144 Dawn Australia Head Duty Small F Clamps, 9" long. A$
45
#3145 Dawn Australia Head Duty Small F Clamp, 9" long. A$
20
#2290 Small Vise with anvil, maker worn off. A$
42
#1840 Miniature Vise with Anvil, 1" jaws. A$
45
#1401 Miniature Vice, very well made, 2 7/8" wide. A$
38
#1013 Miniature Vise with small anvil, some pitting, nice early one marked
1. A$ 35
#678 Wed-Gee Vise #17 USA. FINE A$
38
U49 Miniature Vice, 7/8" wide jaw. A$
25
U4A Small Jeweller's Vice, 1 1/4" jaws, M marked as maker. A$
28
U41 Miniature #1 Vice, nice and early. A$
45
U44 Miniature Vice with anvil. A$
25
U45 Miniature Vice with anvil. A$
22
U46 Small Vice with separate anvil, nice and early, hard to
get. A$ 65
| 
