Machinist & Engineers Tools

Home

Find Your Tool Fast by clicking Here      Search New this week Stanley Parts, blades, etc Orders email Stuart

 

 Engineers Levels, parting tools, tips,

    Letter & Number Sets Click Here
    Micrometers by Moore & Wright, Starrett, Mitutoyo Click Here
    Thread Gauge, Feeler Gauge, Thickness Gauge, Radius Gauge, Fillet Gauge, Screw Pitch Gauge, Angle Gauge, Taper Gauge, Wire Gauge, Click Here
#5489 Jagabi by James Riddle Co #9915 Rec Gauge IOB, box it tatty.  A$ 75
#5508

STARRETT No. 50 A Adjustable Trammel Points Mint In The Original Box5" long. Mounted on a 3 1/2" wooden beam. Marked "The L.S. STARRETT CO. ATHOL, MASS. U.S.A. No. 50-A." .  A$ 85

#5587 Starrett Last Word Indicator.  A$ 75
#5623 Starrett #98 Engineers Level, just about mint.  A$ 155
#5624 Starrett #130 Level 3 1/2", new old stock.  A$ 95
#5585 Starrett #196b Dial Test Indicator Gauge IOB.  A$ 55
#5608 Brown & Sharpe #402 6" Combination Square IOB.  A$ 125
#5474 Lufkin #20s Set of Tempered Steel Rules IOB, not complete.  A$ 36
#5484 Lufkin Radius Gauge Set #770 IOB, a few missing.  A$ 38
#5487 Lufkin Radius Gauge Set IOB, a few missing.  A$ 38
#5485 Lufkin Radius Gauge Set IOB, a few missing.  A$ 38
#5486 Lufkin Radius Gauge Set IOB, a few missing.  A$ 38
#5490 Jagabi by James Riddle Co #9915 Rec Gauge IOB.  A$ 60
#5317 Engineering Block in wood case, 3 x 2 x 1". perfect.  A$ 55 on hold
#5312 Brown & Sharpe #7032-5 Gauge IOB.  A$ 95
#5313 Compac Switzerland 215ga Dial Gauge IOB, .0001" A$ 95
#5314 7 Jewels Lever Test Dial Gauge IOB..0005".  A$ 42 
#5364 Dial Gauge, as new, 0 - 1", .001".  A$ 38
#5339 Magnetic Base, Made in China.  A$ 42
#5340 Magnetic Base, Made in China.  A$ 38
#5341 Magnetic Base, Made in China.  A$ 36
#5342 Lufkin Micrometer Depth gauge #513 IOB, 0 -6" A$ 75
#5356 Starrett #196 Dial Gauge IOB, g+++ A$ 125
#5357 Brown & Sharpe Die Makers Miniature Vice.  A$ 65
#5210 Set of 3 Angle Points IOB.  A$ 38
#5212 Starrett Small Dial Gauge IOB with fittings, slight yellow on face.  A$ 95
#5213 Starrett Small Dial Gauge IOB with fittings, slight yellow on face.  A$ 95
#5214 V Block Set with 1 clamp, 2 x 1 3/4 x 1 3/4", nice quality.  A$ 65
#5217 Steel Blocks 2 7/8 x 2 7/8 x 5/8".  A$ 25
#5228 Nnoga Magnetic Base, heavy duty & large.  A$ 75
#5229 Eclipse Bar Magnet #642 IOB.  A$ 22
#5270

Eclipse E934 MP  Magnetic VBlock  in wooden case.   VBlock measures 2.76" wide x 4.02" long and is 3.75" tall with bottom vee recessed .10" deep.  VBlock has vee that is 1.94" wide at the top.  Current replacement cost is over $1000.  A$ 325 and 2 are available

 
#5275 Eclipse England #212 Large V Blocks, 4 x 3 x 1.5".  A$ 75
#5271

S Type Bradrads Are Used To Machine A Wide Variety Of Materials And For Many Different Applications.no Pilot-hole Is Required, And Good Quality De-burred Holes Are Produced With A Minimum Of Fuss,  model 1 E A, 1 1/2 - 2 1/2".  A$ 175

#5249 Steel Engineers Square 7", nice quality.  A$35
#5250 Brown & Sharpe #542 Engineers Square 7" with bevelled edges.  A$ 65
#5266 Starrett 4" Double Square #13 IOB.  A$ 125
#5264 Starrett #711 Last Word Indicator IOB.  A$ 95
#5145 Arrow Dial Gauge, .01" IOB.  A$ 45
#5070 Comtorgage USA , .0001", not sure exact use.  A$ 65
#5054 Bhara Tools V block Set, 50 x 38 x 25 mm, IOB.  A$ 48
#5492 Federial Dial Gauge IOB, .001".  A$ 35
#5045 Brown & Sharpe #491 Universal Bevel IOB.  A$ 95
#5046 N C K Japan Dial Caliper, .001".  G+++  A$ 85
#5387 Starrett #671 adjustment IOB.  A$ 32
#5366 Lorpet MFG USA ?? centre kit IOB.  A$ 45
#4620 Surface Gauge maker worn.  A$ 32
#5220 Engineers Tool, 6" long.  A$ 15
#5221 Engineers Tool, 6" long.  A$ 15
#5256 Starrett #514a Tape Hook IOB.  A$ 25
#5257 Starrett #191 Jack Screw IOB. A$ 35
#5258 Starrett #453D Die Makers Square IOB.  A$ 95
#5259 Starrett #459 IOB.  A$ 125
#5120 Starrett #645-B Dial Test Indicator IOB.  A$ 55
#5117 Starrett #1025 6" Stainless Steel Slide Caliper IOB.  FINE  A$ 85
#5118 Starrett S254L Parallels set of 6 IOB.  FINE  A$ 135
#5119 Starrett HO600 6" Hole Saw IOB.  A$ 45
#5107 Starrett S254L Parallels set of 6 IOB.  FINE  A$ 135
#5108 Starrett #132 9" Level IOB.  A$ 85
#5113 Starrett #196A Dial Test Indicator IOB.  FINE  A$ 135
#5114 Starrett #196B1 Dial Test Indicator.  A$ 55
#5105 Starrett Telescoping Set IOB.  FINE  A$ 110
#5091 Joubert Garantie France 1-30 sizing plate.  A$ 30
#5112 Starrett #246 Planer & Shaper Gage IOB.  A$ 95
#5072 Starrett #275 2" Outside Calipers IOB.  FINE  A$ 48
#5059 Starrett #50C Extra Long Points for 50 A IOB.  FINE  A$ 45
#4671

Minty Massive Starrett No. 20 24" Machinist Try Square In Original Mahogany Case, Clean and fine with no owner's marks. The tool weighs over 13 pounds without the original mahogany case. A$ 425

 
#4005 Starrett #191 Jack Screw IOB.  FINE  A$ 45
#4726 Starrett #236 Combination Depth and Angle Gauge IOB.  A$ 55
#4752 General Rule and Angle Gauge, new old stock.  A$ 25
#4463

Mint Starrett No. 289A Right Angle Rule Clamp in Box, Unused with owner's name engraved. A$ 65

 

#4534 RARE Large Starrett Height Gauge IOB.  G++  A$ 195
#3812 Engineers Tool Box, some tools, vernier lifting.  A$ 45
#743 Weems Nagividers-FSN-6605-682-4548, Made in West Germany, 1953, Time(mm) or Speed.  G+  A$ 85
#1089 Starrett 134 Cross Test Level IOB.  G++  A$ 100
#3580

Starrett No. 19 Protractor and Bevel Gauge Fine condition with very light staining. No pitting.  A$ 65

#3730 Starrett No. 19 Protractor MIB.  A$ 75
#3731 Starrett No. 453A Die maker's Square MIB.  A$ 95
#4234 MK Protractor, made in Poland, as new.  A$ 65
#5140 Angle Shaper Gauge in wood box.  A$ 75
#3869 Lufkin #900 Master Plane Shaper  Gauge.  FINE  A$ 95
  Just in Carbi-Tool Carbide burrs all new prices from $10 small to $38 largest about 40% off retail, be quick.
#1239 12 Grinding Burrs, 6m and 2m shafts, good quality.  A$ 30
Hack Starrett Hacksaw Blades, new  10 for $20,  50 for $80  100 for $150  available in 14, 18, 24, 32 tpi

X1 Starrett Engineers Level 6".  A$ 95
    For your taps, dies, handles click here
H53 General USA Double Pin Vice.  A$ 26
H61 Beale & Arnold Gauge Master.  A$ 16
H89 Taft Pierce #9115 Sign Bar IOB, marked 5.000 and A J Collet.  G++  A$ 65
#555 Micro Tap guide1/2" shank, 3/16" pin.  FINE  A$ 20 
H69 Starrett 711EA IOB, attachment for adapting #711F, H to Jig Borer Work.  A$ 30
#3891 Lufkin #89 Wiggler IOB.  FINE  A$ 55
#3740 Starrett #711EA Last Word Attachement IOB.  A$ 30
#884 L S Starrett #454 USA Height Gage to 12".  G+  A$ 85
#648 German 10" double sided Large depth gauge.  A$ 55
H92 Brown & Sharpe #782-1 edge finder.   FINE A$ 26
#3934 Starrett S 117 Centre Punch Set, Mint IOB.  A$ 55
#3895 Starrett S-828H Centre Finder IOB.  FINE  A$ 65
#3941 Starrett #494c Tool makers buttons.  FINE  A$ 55
#3942 General USA Set of 4 Small Hole Gauges.  A$ 38
#3978 General USA Telescoping Set IOB.  G++  A$ 55
#1058 Craftsman USA Telescoping Gages IOB.  A$ 35
#1063 Starrett Small Hole Gages and Telescoping Gages.  A$ 85
H90 Lufkin #189 Wiggler.  FINE  A$ 30
C119 Lufkin #89 Wiggler with Ball & Disc Contact IOB.  A$ 45
H75 Small Wiggler, can not read maker.  A$ 18
#4266 Peacock Japan #1364 Dial Indicator, 0 -100, 001" - 2.000". New in the box.  A$ 85
#4273 Brencor Inc USA Angle-Chek IOB, again I do not know much about this.  A$ 55
#4274 Mueller Laboratory Dial Internal Depth gauge, this looks perfect, with instructions on lid.  A$ 125
#4268 Brown & Sharpe #8211-111 Snap Dial Gauge, .0001", made in USA, I do not know much about these, looks in G+ condition.  A$ 95
H58 Ames Dial Gauge  22c, .001".  A$ 38
H66 Brown & Sharpe Best Test 7029-5 Swiss Made Last Word Dial Gauge, IOB    FINE    A$ 95
H67 Verdict England  Last Word Dial Gauge, IOB  A$ 75
#3774 Brown & Sharpe #792 Edge Finder.  FINE  A$ 30
#2596 Starrett #65 Centre Test Indicator.  A$ 65 
R334 Gun Cam Plotting Scale.  A$ 24
U415A Lufkin Bevel Blade, gives Hexagon and octagon angles.  A$ 15
#540 Starrett inside micrometer, stanley small level, engineers square, another level.  A$ 175
#4337 Lufkin#138S USA Diemakers Square, IOB.  FINE  A$ 125
#1297 Brown & Sharpe USA 552 Die Makers Square.  G+  A$ 65
#3734 Brown & Sharpe #552 Diemakers' Square MIB.  A$ 95
H79 Craftsman USA Die Makers Square.  G+  A$ 75
    Click here for adjustable and combination squares
C109 Starrett #60 Reliable Try Square 6".  A$ 75
#3976 Starrett #160 Tool Makers Clamp.  G+  A$ 75
#2666 General #7 Machinist's Jacks IOB, Made in USA.  FINE  A$ 35
#885 Pair of Miniature Bottle Jacks.  A$ 25
#2738 Starrett #18aa very small automatic punch.  A$ 32
#1300 Starrett USA Punch Set 5pc.  G+  A$ 36
H46 Starrett #565B 3/32" Drive Pin Punch.  FINE  A$ 8 each 10 available
H74 Gem Scribe.  A$ 14
H95 Moore & Wright Scribe.  A$ 16
H98 Goodell-Pratt Scribe.  A$ 18
H99 Eclipse #22 Scribe.  A$ 16
H38 Carmet S12-STFCR09 Tool Holder.  A$ 48
#3784 Lufkin #289B Center Finder?, as new.  A$ 35
U419X Starrett # 64 Universal test indicator.  A$ 28
H19 Starrett #49 Combination Bevel.  A$ 75
H18 Brown & Sharpe #499 Bevel.  A$ 45
H6 Starrett 6" rule #C604RE  FINE  A$ 12
#556 Sumasuco London Depth Gauge IOB, 47cm long, some pitting.  A$ 85
H71 X-Acto small pin vise, USA.  A$ 12  sold
C120 Lufkin #20s Set of Tempered Steel Rules IOB.  A$ 65
U397B Moore & Wright telescoping set #900, 3/4" - 6". G+  A$ 100
#4226 C S  Germany Height Gauge, 10" long.  G++  A$ 65
#4229 HDT International Magnetic Base with fittings.  A$ 48
#4616 Surface Gauge, maker worn.  A$ 32
#4618 Surface Gauge small size.  A$ 15
#893 Small Surface Gauge.  A$ 24
#1156 Lufkin USA Surface Gauge.  G+  A$ 35
H50 Eclipse Magnetic Base IOB, very nice and hard to find, micro adjustments.  A$ 120
E37 Magnetic Base.  A$ 45
#3975 Starrett #289a Combination Rule attachment.  A$ 45
C58 Starrett# 289A attachment for combination squares.  G+  A$ 45
B21 Lufkin 18A Angle Rule Clamp.  A$ 45
H42 Starrett #289A Attachment for Combination Square 1".  A$ 40
H36 Starrett 12" #4 Grad combination rule, G++  A$ 35
H77 Unusual Micro Divider, no maker.  A$ 20
#4807 V Blocks 2"x 1 1/2".  A$ 35
#4808 V Blocks  1 x 3/4".  A$ 28
#4809 V Blocks 1" x 3/4" x 2 1/2".  A$ 38
#4811 V Blocks 1 1/4" x 1 1/4".  A$ 28
#4812 Starrett #271V Blocks with clamp, small size, 1 1/4 x 1 1/4".  A$ 75
#3945 Lufkin #908 V Block Set USA.  G++  A$ 65
B25 J Rabone & Sons Engineers Level, 12" long, has a replaced small vial, bottom has a few dings, works well.  A$ 125
#1148 Rabone 12" engineers level, vials all good, little pitting on base and a few small marks.  A$ 125
#1943 Drill Reducer #3 to #2 Morse Taper.  A$ 45
H37 Lock Australia knurling tool, handle has been cut down in size.  A$ 32
#573 Starrett #194 Universal Scraper IOB.  G++  A$ 75
#1411 Brown & Sharpe Woodruff Key Seat Cutter No 15 R 1" x 1/4" IOB.  G+  A$ 45
#1412 Brown & Sharpe Woodruff Key Seat Cutter No 5 R 5/8" x 1/8" IOB.  G+  A$ 35
#1177 Tool Steel, 1/2" x 4" long.  A$ 10 each
#1178 Tool Steel, 5/16" x 2 1/2".  A$ 7 each
#1179 Tool Steel, 1/4" x 2 1/2".  A$ 7 each
#1180 Tool Steel, 3/16" x 2 1/2".  A$ 5 each
#1181 Carbide Tip Tool Steel, 5/16" x 2 1/4".  A$ 5 Each
  Double ended boring bars new old stock, 1/8"  A$ 15.    3/8"  A$ 32
U282 Reiff & Nestor #1 11 - 24 thread cleaner.  A$ 26
H52 Whitworth Thread cleaner, made in France.  A$ 25
D1 Kennedy USA Engineers Tool Box, 7 draw, metal case, very slight repair on outside hinge.  A$ 275
C151 Set of 7 imperial allen keys extra long at 12" from 1/4" down.  A$ 30