Jewelers & Watchmakers Tools

Home

 Find Your Tool Fast by clicking Here      Search New this week Stanley Parts, blades, etc Orders email Stuart

 

#1238 Jeweler's Bur Set, large set IOB, some used, #44c, quality burs no cheap stuff.  A$ 135
#971 30 Jeweler's Burrs, high quality, Made in France.  A$ 125
#1198 A F Davis Jeweler's Steel Number Block 2" long.  A$ 30
#1047 Plumb USA Soft Face Hammer, real nice.  A$ 25  sold
#1048 Jewelers Steel Verge Mini Lathe, steel base is 7 3/4" long. A$ 95
#1049 Jeweler's Centring Lathe in Brass.  A$ 75
#1050 K & C D.R.G.M Jeweler's Tool, not sure about this one but has maker.  A$ 65
#818 Jacobs 1A Chuck 0 -1/4" #1 morse taper IOB.  FINE  A$ 25
#825 Jeweler's Chasing Hammer, has makers mark but I do not know this one, replaced handle, very fine head.  A$ 65
#851 Summit Jeweler's Vernier's, Made in Japan., in its leatherette case.  G+  A$ 38
#867 Buck Tools USA Miniature Jeweler's Chuck.  G+  A$ 95
#868 Stubbs England 10 Assorted Jeweler's Engravers.  G++  A$ 50  I have about 10 lots of these.  The engraves are much nicer than picture
#998 Jeweler's Crystalite Products Core Cab Kit.  A$ 25
#999 Jeweler's Crystalite Products Core Drill Set.  A$ 16
#715 Jeweler's Crystalite Carvers Tool Kit(500 Grit).  A$ 25
#716 Jeweler's Crystalite Diamond Drill 1 1/4 mm.  A$ 35
#717 Jeweler's Crystalite Diamond Point Kit.  A$ 25
  #667 Chrystalite Diamond Points for jeweler's.  G+  A$ 35
  #670 Jeweler's Screwdriver Set IOB, JAPAN.  FINE   A$ 28
#679 Jeweler's small wrenches, made in Japan, iob.  FINE  A$ 25
#680 Jeweler's small wrenches, made in Japan, iob.  FINE A$ 25
#1067 Jeweler's Engraving Set.  A$ 30
#525 Vigor 22pc Tool Kit in Fine leather Case, when only the best will do.  FINE  A$ 275
#979 Jeweler's Saw unmarked but is a Miller Falls #377, very nice.  A$ 48
#612 F P Maxson Mfr Reg US Pat Off Early Fret Saw.  G+  A$ 35
#613 German Jeweler's saw.  G+  A$ 40  sold
#1209 Brookstone Germany Jeweler's Saw.  A$ 38
#1210 HR Germany Jeweler's Saw.  A$ 38
#1211 Europa Germany Deep Jeweler's Saw.  G++  A$ 45
#1149 Rare Stub's Jeweler's Hammer, double face with one domed, a few dings on other face, very hard hammer to find.  A$ 95
U56L Jewelers Hammer Swiss makers  Tissot, , 2 1/2" head, nice original handle, small chip on side of head.  A$ 48
U56M Jewelers Hammer German  makers, 2 1/2" head,  original handle , strapping on side, some pitting on head.  A$ 45
U56J Jewelers Hammer no makers, 3 1/4" head, nice original handle.  A$ 35
U56H Jewelers Hammer Henry Boker Germany, 2 1/2" head very fine, nice original handle.  A$ 55
U56K Jewelers Hammer German  makers, 3" head,  original handle with small split, will not effect use.  A$ 40
J222 Double Face Jeweller's Hammer, very nice, good handle.  A$ 85 extra nice
K56 Small double face Jeweler's Hammer.  A$ 12
J218 Double face Jeweller's Hammer, faces are domed, good handle.  A$ 65
J213 Jeweller's Chasing Hammer. FINE  A$ 35
J216 Jeweller's Swiss Style Hammer.  FINE A$ 22
#827 G Boley Germany Swiss Style Jeweler's Hammer.  FINE  A$ 55
K6 Jeweller's Hammer.  A$ 38
K7 French Jeweller's Hammer.  A$ 45
K8 W Whitehouse Atlas Forge UK Jeweller's Hammer, very fine.  A$ 50
J63 Swiss style hammer with straps, original handle, 3 1/2" long head.  A$ 35  sold k
J202 Timber Jewelers hammer, round and flat face, very unusual design.  A$ 25
K9 Small Unusual Hammer, 3/4" flat head, 3 1/2" long.  A$ 34
J17 Standard Swiss style hammer, 2 7/8" long head only.  A$ 25
J18 Standard Swiss style hammer, 2 3/4" long head with 7/16" face, nice original handle.  A$ 50
#1208 Watchmakers 9 Hole Hand Tongs.  A$ 25
#1132 5 Miniature Hand Vices, some with makers.  A$ 80
#1071 3 Vintage  Screw Plates by 2 x Boker and 1 by Martin.  A$ 50
#650 Turtox Products Germany 6 pc tools kit, 2 scalpels, 3 picks and 1 scissor.  A$ 35
J227 Small Vernier Caliper USA.  A$ 28
J5 Watchmakers callipers Favorite Swiss.  A$ 35
J64 Watch craft Watchmakers callipers.  A$ 40
J7 Watchmakers callipers France.  A$ 40
#852 Watch tool, made in USA, looks to grab an item in a watch.  A$ 35
J230 Hand Remover.  A$ 22
#268 Dunlop USA Chain Nose & Side Cutter, 5 3/4" long.  A$ 16
#296 Sadler Optical Pliers.  FINE  A$ 26
#1222 VC & C Germany Flat nose pliers, 4 3/4" long, very fine pliers.  A$ 25
#269 Japan Jeweler's  End Cutters, 4" long. G+  A$ 22
#270 Japan Jeweler's Diagonal Cutters, 4" long.  FINE   A$ 22
#961 Channellock 4 1/4" side cutter.  A$ 20
    For more small pliers and Jewelers pliers click here
#962 Belzer Germany 4 3/4" end cutter, top a bit rough.  A$ 16
#272 Stanley #84-121 Japan needle nose pliers.  A$ 16
#959 Peer West Germany 5" Round Nose pliers.  A$ 18
#960 Utica Long Nose Flat Pliers, 5 1/2" long.  A$ 18
#963 Utica Long Nose Flat Pliers, 6 1/2" long, one tip rough on outside but not on inside.  A$ 14
#965 Jeweler's Tinner's Shears, 7 1/2" long, made in Germany.  A$ 22
#966 HR France Jeweler's Shear's with spring, 7".  A$ 24
J233 J A Henckles Germany Jeweler's Nippers, extra nice this one.  A$ 38
#256 Jeweller's Long nose pliers, rounded on ends. G++ A$ 25
#257 Jeweller's curved tip, flat pliers.  A$ 25
#292 Japan Needle Nose pliers, 4 1/2" long.  G+  A$ 18 
#293 Japan Needle Nose pliers, 6 1/4" long.  A$ 16
#295 Singer  Unusual plier, cutter and more.  A$ 26
J205 Jeweller's Flat Pliers, 4", very nice.  A$ 20
J206 Lindstrom Sweden Jeweller's Side Cutters, 5".  A$ 22
J207 Gust Hungerberg, Germany, 5 1/2"Jeweler's Side Cutters.  A$ 22
J34 Crestoloy USA curved tip chain nose pliers, 6".   A$ 15
J35 6" Scissors, can not tell maker Japan?.  A$ 12
J38 Klauke Chain nose pliers, 5 1/2".  A$ 20
C129 Small Jeweller's Pliers, 4 3/4" long.  A$ 15
J50 Watchmakers pliers, do not know much about these.  A$ 11
J51 Watchmakers pliers, do not know much about these.  A$ 11
J53 Watchmakers parallel punch pliers.  A$ 28  sold
J42 France side/end nose pliers, very unusual, 4 1/2".  A$ 18
J209 F & H Jeweller's Pliers, 4 1/4" long.  A$ 16
J210 German Jeweller's Pliers, 4 3/4", round top flat inside,  A$ 22
C43 Slot Anvil, used as a base for staking, riveting and drilling small parts.  V-slot is handy for removing pinions and similar items.  Has 9 graduated holes.  A$ 75  on hold
C44 Hexagon Anvil, used as a base for staking, riveting and drilling small parts.  A$ 75
J203 Starrett #129 Bench Block, 1 1/2" high & 3" diameter, holes range from 1/8" - 5/8".  A$ 85
J33 Germany Steel Bench Block, 60 x 60 x 30mm.  A$ 35
C159 Small Double Pin Vice #4068.  A$ 18
#562 Watchmakers Miniature Punch set in Real nice wooden turning box, smallest punches made.  A$ 65
J21 France Steel hand vice slide lock, 4 1/2", some pitting.  A$ 15
C106 Jeweller's Screw Plates.  A$ 25
J234 Jewellers & Watchmakers miniature die set with holder, USA Makers, 18 pcs - .  A$ 110
J235 Jewellers & Watchmakers miniature die set with holder, USA Makers10 pcs.  A$ 65
J49 Standard brass ring stick, small bend.  A$ 35  sold
C50 Clock Makers Dial Gauge, brass face only.  A$ 75
C51 Clock Makers Dial Gauge, all brass.  A$ 75
J229 Ring Cutter, no maker visable.  A$ 30
J69 Favorite Balance scales with weights. A$ 95
J31 Seederer-Kohlbusch USA Wood Boxed Folding Carat Scale, missing some weights.  A$ 85
J231 Carl Mahr Essingen #127244 1/100mm dial gauge.  A$ 40
J232 Carl Mahr Essingen #129934 1/100mm dial gauge.  A$ 40
J224 Burton Reid Movement Size Gauge.  A$ 18
J45 Munchen 15 Controller Germany, in original case.  A$ 16
J48 Watch brass width gauge.  A$ 25
J43 2 Pattern D Transverse end cutters, 4 1/2" & 3 1/2" small chip.  A$ 20
J59 Glass burner.  A$ 15
J62 Japan Linen Tester magnifier, .   A$ 20
J64a Moore & Wright tube callipers, 3 3/4" long.   A$ 25
J65 Moore & Wright jewellers screwdrivers, top of case cracked.  A$ 25