SAWS, SAW VICES , Disston Saws

Hand saws, saw vise, Disston Saws, Brass Back Saws

Saw Handles    Saw Medalions   Saw Sets  click the box

#2350 Paragon Sweden Brass Back Saw, as new, 12tpi. A$ 110 

#2352 H Swift & Sons Sheffield very early Brass back saw with split nuts, 12" long, 12 tpi.A$ 125 

#2349 W Tyzack Sons & Turner LTd #120 Brass Back Saw, 12" with engravings, 13tpi. G++ A$ 125 

#2347 Paragon England Brass Back Small Gents Saw, 8" long. FINE A$ 40 

#2348 Disston Canada 10" back saw, 12 tpi, as new. A$ 45 

#2351 Robert Sorby Brass Back Saw, 12tpi. G++ A$ 110 

#1866 Zenth Marshall Wells Saw, full engravings, looks unused, 18" long. A$ 75 

#1865 Pad Saw, the timber on the handle is unreal, a few minor chips but the colour is fantastic. A$ 65 

#1855 R Viter German Steel dovetail saw, what a great little saw, 8", tiny chip off end of handle, super patina, 10 tpi. A$ 110 

#1807 Drabble & Sanderson Sheffield Brass Back saw, 9", thisione is heavy great handle, 12tpi. A$ 110 

#1808 James Howarth Sheffield Brass Back Saw,10",16tpi, great handle, owners marks on handle. A$ 100 

#1809 Spear & Jackson # 26 Brass Back Saw, 10", 15tpi, good handle, owners marks on handle. A$ 95 

#1748 Warrented Superior Back Saw, 12 tpi, 12" long. G+ A$ 38 

#1749 R Groves & Sons Brass Back Saw, silver steel, elastic spring temper, this was the top of the range at the time, 12", owners name on handle. A$ 110 

#1750 W Marples Bow saw, 23" long, nice and clean. A$ 85 

#1751 Spear & Jackson Brass Back Saw, nice and heavy, clean, 14". A$ 95 

#1711 Crown Tools Dovetail Saw, super fine teeth 20 tpi. A$ 36 

#1685 Nice small 12" hand saw, 8 tpi. A$ 35 

#1686 Disston 1943 Vintage Chain Saw portable with both handles and file. A$ 135 

#1687 Spear & Jackson Etna Cross cut saw, full engravings on saw, 3ft, extra clean, very little if any use. A$ 125 

#1629 Crown England Gents Saw, extra fine, new old stock, 10". A$ 55 

#1498 Sheffield Gents saw, 7", extra fine. A$ 36 

#1503 Disston Canada D8, 12tpi, full engravings, 20", nice and clean. A$ 110 

#1504 Disston Phil B 23 lightweight,16", rare to find, nice and clean. A$ 110 

#8647 Eclipse #675 England small coping saw. A$ 16

#7265 Heavy Duty Hacksaw blades, all but 1 are 13" long, mostly by Turner Australia high speed steel. A$ 35

#9132 Craftsman Deep Coping Saw, 6" deep. A$ 24

#1204 Flush Cutting Saw, good blade and handle, 250mm blade. A$ 48 

#1071 Pine Knot #V7 Saw Vise in the original box. A$ 85 

#9648 Kaye & Sons Dovetail Saw, 10", 11 tpi. A$ 65 

#9060 Jack 22" Wood handle saw, very little use, 10 tpi. A$ 16 

 #9728 G Preston & Sons 14" brass backed tenon saw, Blade is clean and straight both ways.Teeth are all present, well formed and sharpish, 12 tpi. Handle is clean and in good condition,nice patina, top horn slightly shortened. Partial or most of engravings on saw. A$135

 #9729 S pear & Jackson 10" brass backed dovetail saw, Blade is straight both ways and clean. All teeth present and well formed, 15tpi. Handle is firmly attached to the blade and is in very good condition, tiny chip to lower horn. A$ 110

#1071 Pine Knot #V7 Saw Vise in the original box. A$ 85

#1877Stanley Sign, 17 1/2" long and 4 3/4" wide, hard plastic, I do not know what they are off, hard to find and get.  A$ 35 each

#1701These are now in Scale model Stanley Rule & Level Co. Toy Stake Truck. These were made for one year in the 1990s. These are hared to find, especially in the box, and they aren't making any more of them. Very Sturdy mostly steel construction, approx 4" long by 2 1/2" high. This is very nice example of this highly collectible toy . A$ 95  

 #1702These are now in stock Scale model Stanley Rule & Level Co. Toy Truck.  These were made for the 1986 season by Corgi.  Very Sturdy mostly steel construction, approx 5" long by 3" high.  This is very nice example of this toy.  A$ 135 

#1132  Saw Handle. A$ 12

#1133  Disston Saw Handle. A$ 16

#1134  Disston Phil Saw Handle. A$ 25

#1135  Disston Saw Handle. A$ 16

#1136  Disston Saw Handle. A$ 16

#1137  Warranted Superior Saw Handle. A$ 15

#1138  Disston Saw Handle. A$ 16

#1139  Disston Saw Handle. A$ 16

#1140  Saw Handle. A$ 12

#1141  Saw Handle. A$ 12

#1142 Saw Handle. A$ 12

#1143 Saw Handle. A$ 12

#1144 Saw Handle. A$ 12

#1145 Disston Phil Saw Handle. A$ 22

#1146 Saw Handle. A$ 16

#1147 Disston Saw Handle. A$ 18

#1148 Warranted Superior Saw Handle. A$ 25

#1149 Saw Handle. A$ 25

#1150 Saw Handle. A$ 8

  #9482 Early Saw, great handle, 10" long.  A$ 45

#9441 Stanley #15-104 USA Saw, as new.  A$ 22

#9335 Patternmakers miniature hand saw, maker is worn, 8 1/2".  A$ 95

 #9061 Disston Canada Panel saw, most of its engraving, 12" long, good handle, 11 tpi.  A$ 85

  #9052   Spear & Jackson Brass Back Panel Saw with great timber handle, 14", 12 tpi. A$ 110

#8305 Homelux England mini tile saw?  A$ 10

#847 7Nice Gents Dovetail Saw, maker worn, 10" long, 15 tpi.  A$ 24

#8618 E C Atkins #21 Metal Saw, 20" long, this is is just about mint, fully engraved, thats right for cuttinf metal.  A$ 145

#8874 Nice Panel Saw, maker worn, good handle, 12" long, 9 tpi.  A$ 24

  #9055 Nicolson Professional Saw, 22", 9 TPI.  A$ 26

  #9056 Spear & Jackson Work Horse 26" saw, wood handle, very little use, 7 tpi.  A$ 32

  #9057 Spear & Jackson Sprint 26"saw, wood handle, very little use, 7 tpi.  A$ 32

#8198 W.Tyzack Timber Keyhole Saw 18".  A$ 55

#8199 Timber Keyhole Saw 11 1/2", rare m tooth blade.  A$ 55

#8200 Timber Keyhole Saw, 16" long, tiny bend at end.  A$ 20

#8201 Miniature Saw with brass blade, 5" blade.  A$ 25

#8097  Henry Disston Phil Stair Saw, owners name in timber, nice saw.  A$ 72

#8077  Fabulous Small Stair Saw, owners name on blade, unreal handle, 7".  A$ 135

#8055  Very Rare Disston #69 Jeweler's Saw Brass Back 6", first ever I have offered for sale.  A$ 175

#7609 Crosscut Saw Handle, these are always missing.  A$ 45

#7329 Freud GS009 Gents Saw, 6" blade, 15pts.  A$ 75

#7321 Freud DS008 8" Dovetail Saw, 20 points.  A$ 75

#7123 Pristine Gents Saw brass back, extra fine.  A$ 75

#6461 Japanese Pull Saw, blade 6 1/2" long.  A$ 35

#6549 Parker #55 USA Coping Saw.  A$ 18

#6462 Tyzack Brass Back Dovetail Saw, 6" long, 15 tpi.  A$ 45

#6463 Tyzack Brass Back Dovetail Saw, owners name on saw, 8" blade, 15 tpi.  A$ 45

#6464 Pamada Portugal Nice Back saw, 14" long, 13 tpi.  A$ 26

#6465 Japanese Pull Saw, 6" blade.  A$ 35

#6378 RH Davis Back Saw 12tpi with open Handle, 12" long, good handle.  A$ 38

#6426 Rare Design Saw, maker worn, 9" blade.  A$ 45

#6376 Sandvic Tradition hand saw 7tpi  with full engravings on handle and steel, hang hole on top of steel, 24" long.  A$ 42

#6151 Spear & Jackson, as new dovetail saw with engravings, 12" long, 12tpi.  A$ 35

#5793 Stanley Contractors Dovetail Saw, 10".  A$ 36

#5211  Fret Saw, 11" deep.  A$ 18

#5563 Brass Back 8" Gents Saw.  G++  A$ 38

#5604 Tyzack-Turner 8" Brass Back Dovetail Saw 20 tpi, very little use.  A$ 110

#5855 Sandvik Brass Back Dovetail Saw, 12" and very fine very little use.  A$ 110

#8052  Atkins Silver Steel No. 26 Patternmakers Saw in Box, 7 1/2" blade. Razor sharp. Some spots and tarnish, but pretty much new.  A$ 195

#4919 Stanley S/N 150 Years Dovetail Saw IOB.  MINT  A$ 135

#6003 Unfinished Saw Handle.  A$ 12

#6002 Disston Saw Handle, these are used and I think they came off Disston saws.  A$ 12 sold

#6005 Disston Saw Handle, these are used and I think they came off Disston saws.  A$ 15

#5833 Hand Saw Handles new old stock.  A$ 15 each 3 available

 #5185 Back Saw, marker worn, very nice one, 12" long, 11tpi.  A$ 30

#4709 Fischer Flush Cut Saw, 5 3/4" long.  A$ 22

#4783 Small Gents Saw made in London England, 6" blade, extra fine.  G++  A$ 35

#4161 The Holt Mfg Co Hartford, Con Pad Saw, brass looks like new.  A$ 45

#4576 WENTWORTH'S No. 1 Patented Saw Vice, Rusty but in sound condition. Quick release style preferred by all.  A$ 58

#4020 Small Frame Saw, blade is 7 1/2" long and the saw is made of American Oak.  G++  A$ 95

#3381 Japanese Pull Saw, different size teeth on both side, 18" long with handle.  A$ 46

#4002 Japanese Pull Saw, no maker, very nice, 10 1/2" long blade.  G+++  A$ 55

#2656 Bridge City Tools Japanese Saw JS-6 Crosscut saw double sided, 9 1/2" long, 2003 signature series.  A$ 145

#1641 Rare GEO H Bishop & Co Cincinnati, OH  Cabinet Saw with Depth Stop, 10" blade, not cleaned, engravings on both side, excellent engraved handle, nice clean steel.  G++  A$ 165

#1700 E C Atkins & Co 10" Stair Saw, name is hard to read but is visible.  A$ 85

#2377 Sutton Tools Re-Load Arbour, for hole saws 14mm to 192mm, suits 10mm chuck, as new.  A$ 38

 #2782 Starrett Hole Saw Set with Arbor, 3 3/4, 2 3/4, 2 1/2, 2, 1 1/2, 1 1/4", some are worn, very expensive to replace.  A$ 75

#1244I WHS 2 1/2" Carbide Tip Hole Cutting Saw, all tips in place, heavy duty.  A$ 55

#1204 Clipper Tool Co Saw Vice, Patent Feb 20, 1906.  G+  A$ 55

#614 Large Crosscut saw handle.  A$ 45

#2421 Marples & Sons Large Size Pad Saw handle  with brass fittings, handles is 8 1/2" long and much longer than the common size, nice patina.  G+  A$ 65

 Hack  Starrett Hacksaw Blades, new  10 for $20,  50 for $80  100 for $150  available in 14, 18, 24, 32 tpi

S824 Brass saw screws and badges.  Screw and nut.  A$ 4 each, badge  $8 many available

U99A Early saw Vise, can not see maker. A$ 55

#2710 Fiskars 18" D Handle Woodzig Saw, patented chainsaw style teeth, made in USA.  A$ 45

#4021 Red Devil USA Flush Cut Saw.  A$ 22

#4159 Stanley Gentleman's Saw.  FINE  A$ 45

#4022 Steel Back Gents Saw, 6 1/2" long blade, extra fine.  A$ 35

#4023 Brass Back Gents saw 30 tpi, 5" blade.  FINE   A$ 45

#3001Zona Razor Saw, IOB.  FINE  A$ 45

#1381 Eberle Profi 12" dovetail saw made in Germany.  A$ 35

#3293 Atkins Dovetail Sw with engravings on blade, 10" blade 14 tpi.  A$ 55

#777 Brass Back Gents saw 30 tpi, 5" blade.  FINE   A$ 45

 #503  Henry Disston #68 Brass Back Gents Saw with some engravings, 10" saw.  G+  A$ 65

F30 Handy Brand Brass Back Saw, 5" blade, engraved on blade, 16 tpi.  A$ 45

#726 George Ibbotson Ltd Sheffield 6" dovetail saw, 15tpi, straight blade, tiny pitting.  A$ 45

#970 Beech Handle Brass Back Dovetail Saw, some pitting on blade, few dings.  A$ 30

#2662 Freud GS006 6" 15point Gents Saw.  G++  A$ 58

U61A John Cockerill, Sheffield Small 6" Brass Back Gents Saw, nice handle, G++.  A$ 95

U61B Fagan London Small 5" Brass Back Gents saw.  Nice handle, some pitting on blade, little bend on tip but could be straighten.  Very hard to get small named saws.  A$ 75

#1134 Disston 10" Gents Saw.  G++  A$ 38

U76 Dovetail or Dowel Saw made in Germany, 9 3/4" long blade,  hanging hole in handle.  A$ 25

 B52  Flush cutting saw, 8" long, no maker, extra fine teeth, nice handle.  A$ 40

 #5129 Tyzack & Turner Brass Back Dovetail Saw, 8", most of original engravings on blade, 18 tpi.  A$ 135

 #5292 Spear & Jackson 8" Brass Back Dovetail Saw, 15 tpi, tiny pitting on steel but clean steel.  A$ 85

#4160  W Tyzack & Sons & Turner Brass Back 8" long Dovetail Saw, 15 tpi, as nice as they come.  A$ 125

#3590 Wards 10" Brass Back Dovetail Saw with open handle, 13 tpi, handle is extra nice, a little pitting on blade.  A$ 85

#3591 Spear & Jackson 12" Brass Back Panel Saw, tiny crack right where brass touches handle, 13 tpi.    A$ 75

#2688C Taylor & Sons Brass Back Open Handle Dovetail Saw, teeth are a bit worn, a little pitting in steel.  A$ 65

#1965  Burnt Tree Works Sheffield 12" Back Saw, good handle but loose, 12tpi.  A$ 24

#621  Cincinnati Saw Company 12" long back saw  13 tpi, good handle.  G+  A$ 45

F44 Henry Boker 12" back Saw, 10 tpi.  G+ A$ 35

#4066 Disston Panel Saw 12" long, 12tpi.  G++  A$ 35

 #545  George Ibbottson 12" Panel Saw, 12 tpi, full engravings.  A$ 32

#2668 Freud 12" Brass Back  Tenon Saw, 13 pts.  A$ 85

#1698 Spear & Jackson Panel Saw, good handle, clean blade, 16" blade, 10 tpi.  A$ 110

#3146 Henry Disston Canada Keystone Dovetail Saw, engraved on blade, good handle, 10" long,14 tpi.  A$ 85

  C92  Simonds Saw Co 10" 13tpi Dovetail saw, full engravings, very nice handle.  A$ 75

  C100  Lloyd Davies Sheffield 10" 14tpi Dovetail saw, full engravings, good handle. A$ 85

F23 Disston Brass Back 12" dovetail saw14tpi, Canada, Full engraving on blade, owner N.A. engraved in brass and handle, estopol on blade and handle. A$ 90

  E Garlick & Sons Sheffield 12" Brass Back saw, 15tpi.  FINE  A$ 110

C134  Henry Boker Brass Back Saw, 12", small pitting, good handle.  A$ 45

#4289  G & T Gray Sheffield 12" long Brass Back Saw, good handle, 12tpi.  A$ 75

#4288  Nice 12" long Back Saw, maker worn off, good handle, 12tpi.  A$ 25

F10  R H Davis 12" Back Saw, Canada, 12 tpi, clean blade, good handle.  A$ 30

F25  Wm Gregory Sheffield 12" Back Saw, Hammer marked also, 11tpi, good handle.  A$ 65

#1263  Spear & Jackson 12" Back Saw, 12 tpi, handle good, light pitting.  A$ 38

#2417  Disston Back Saw 14", good handle, 12 tpi.  clean saw.  G+  A$ 36

#4766  Pax 14" Brass Back Panel Saw as new, 15 tpi.  A$ 155

#4290  Spear & Jackson 14" back Saw, 13tpi.  A$ 18

#3758  W R Fletcher London 14" Brass Back Saw, good handle, 2 hang holes in blade, a little pitting.  A$ 65

#622  Wards Master 14" long back saw  13 tpi, good handle.  G+  A$ 45

#623  Pennsylvania Saw Corporation #79 14" long back saw  11 tpi, good carved handle.  G+  A$ 55

F39  Sanderson Newbold Pax Brass Back Panel Saw, full engravings, 10 TPI, 14".  G++  A$ 90

F12  Wm Sykes & Co Sheffield 14"Back Saw, some pitting, 10tpi.  A$ 25

#3722  Adria Dovetail Saw, 15tpi, Blade is filed rip, has 15 tpi, kerf width is 0.025", blade itself is 0.020" thick, Open type handle, made of Bubinga (African Rosewood). Red-brown color, very strong. Blade size (useful part) is 8"x2".  A$ 210

#3723 Adria Large Tenon Saw, filed rip, with Bubinga handle,  

• Blade is 0.025" thick, kerf width is 0.033".   
• Blade is made of high quality spring steel hardened to RC52.   
• Closed type handle, made of Bubinga (African Rosewood). Red-brown color, very strong.   
• Blade size (useful part) is 14"x4".   A$ 255 

U65 Slack Sellars & Co Sheffield Back saw, 14" blade, some pitting on blade, handle good.  A$ 25

F34 Disston Phil 27" Panel Saw, Stanley Engraved on blade, 6" deep, one clean side and one pitted side, sharp and ready to use. The pitted side is deep, good side is very nice. A$ 110

  C79 Groves & Sons Sheffield 13" 12tpi Back Saw, very nice handle.  A$ 75

 #5200  Warranted Superior 26" hand saw, 7 tpi, nice and clean.  A$ 25

 #5201  A Asrion & Sons SheffieldEngraved Hand Saw, 24" long, 5 tpi, early saw, nice and clean.  A$ 45

 #5202  Warranted Superior 26" hand saw, 7 tpi, nice and clean, I broke handle after photo, dropped it, just need reglueing together, bargain.  A$ 15

 #5197  Spear & Jackson 26" long 7 tpi hand saw, extra deep saw, owners initials on handle.  A$ 35

#4410  Disston 26" Hand Saw, carved Handle, 5tpi, part label on steel.  A$ 38

#2369  Warranted Superior 6points saw, 26" long good handle, will clean great.  A$ 36

#2121  Spear & Jackson Sheffield 26" hand saw, some pitting in blade, deeper than the above Disston, good handle.  A$ 24

#2372 Disston Philadelphia 9tpi Hand Saw, 21" long with good handle,  small bend, need a clean.  A$ 24

#2373 Disston Philadelphia 9tpi Hand Saw, 24" long with good handle, part engraving, small bend, need a clean.  A$ 22

#2678 Disston Large Saw Vice, this one has been welded on both sides, early patent date, early weld and perfect to use.  A$ 55

#2506 Folding Handsaw, blade 9" and with handle over 18" long, little bend in blade, a little pitting.  G  A$ 38

#1203 Nest of Saws, good wood handle, surface rust but should clean.  A$ 32

  C95  Hammacher Schlemmer & Co NY #100 Hack Saw.  A$ 45

  C96  Early Hack Saw. A$ 12

#2470Rare W Tyzac & Sons & Turner Ltd Nest of saw, maker engraved on each blade, smaller blade small bend.  A$ 32

F16  Very nice key hole saw with engraved maker but not readable.  A$ 28

#1577Smith Lion & Co Key Hole Saw, 16" long, some pitting on steel, owner engraves handle.  A$ 32

F21 Harvey W Peace USA key hole saw, partial name on blade, good handle.  A$ 35

#823Key Hole Saw.  G++  A$ 18

#2364Stanley Hack Saw, tubular frame, as new.  A$ 18

#978Unusual Design Fret Saw.  A$ 25

#824 HM Fret Saw, very different design, cast aluminium.  G+  A$ 20

F18  Unusual Fret saw has maker.  A$ 16

F19  Unusual Hacksaw.  A$ 16

#1945 Spear & Jackson Eclipse pack of 10 Coping Saw Blades.  A$ 8  5 available

#1946 Coping Saw.  A$ 14

#1948 Craftsman USA Coping Saw.  A$ 18

#1949 Coping Saw.  A$ 14

F42 Eclipse Saw  PS51 Fret Saw.  A$ 16

U105 Beech Pad saw, no maker.  G+   A$ 18

U63 2 brass printing blocks of old saws.  A$ 45

U79 Knapp & Bowles Bridgeport Conn saw, pat 1892.  A$ 65

C122 Surgeons Saw, Star Logo, 10 3/4" long with brass handle.  A$ 75

U78 Pocsi Hand Chain Saw Made in France with spare blade.  A$ 35