Adzes

#1877 Stanley Sign, 17 1/2" long and 4 3/4" wide, hard plastic, I do not know what they are off, hard to find and get. A$ 35

#2280 Rabbet Trap Setter, maker is worn. A$ 75

#2281 C W Tonoose & Sons Cannook Rabbet Trap Setter, very early one. A$ 85

#2279 Hytest Rabbet Trap Setter. A$ 75

 

#2096 Hand Adze, 2 5/8" edge, extra nice. A$ 135

 

#2009 RARE Early Hand Adze, carved handle, marked #1 and sheffield, has some pitting, 4" edge, handle is a little loose. A$ 165

 

#1551 Chairmaker's Bowl Adze, A massive bowl adze with an edge 7 1/2 inches across. 7 1/2 inch handle. We can't make out the maker's mark. A$ 195

 

#1552 French, signed "VARBONNE." The cutting edge measures 7 inches across. 11 inch handle. Clean, sharp and ready to use. A$ 195

 

#1579 Extra RARE Hand Adze with one curved for bowl and other straight, this has complete markings and makers marks, total of 18 engravings, no handle was with this one, 10" long, 3" wide straight adze and 1 1/2" curved, never to be repeated. A$ 595

 

#1669 Biber Austria Curved Adze, as new, 11/2" wide. A$ 135

#1663 NIce adze with full pole, 4" edge. A$ 70 with handle  $85

   

#1684 City Tool Works LA Adze hammer, both ends are the same 1 1/3" wide. A$ 75

#1347 Fantastic Shipwrights adze, maker worn, 4 3/4" edge. A$ 85

#1263 Chairmaker's Bowl Adze, A large adze with an edge that measures 6 1/2 inch across. A great user. Hand forged, has a replaced handle now as too many white ant damage . A$ 175

#1264 Chairmaker's Bowl Adze, Signed "GRININGER." Sharp edge measures 7 inches across. A great user, has a replaced handle now as too many white ant damage. A$ 195

#9699 Esco H177 HTB Wide Adze, 5 3/4" edge. A$ 75

#9700 Esco Wide Adze, 5 3/4" edge. A$ 85

#9701 Esco H177 HTB Wide Adze, 5 3/4" edge. A$ 95

#9760 Shipwrights Gutter Adze, full pole, hard to get these, 5 3/4" wide x 11" long. A$ 155 

#2140 H logo long adze, 12 /2" long and 4" wide, this is really long for an adze, some pitting. A$ 70

#5502 Plumb Shipbuilders Lipped Adze, I decided not to clean this one, has a rust but does not look like it has had much use. A$ 145

#9004 Nice early hand adze with hammer head, 65mm edge. A$ 125

#9007 Green #1 Hand Adze with hammer head, 53mm edge. A$ 175

#9009 Nice early hand adze with hammer head. A$ 125

#9236 Nice early hand adze with hammer head, 70mm edge. A$ 135

#9201 Nice Early Hand Adze handle has chip on end, some pitting, 73mm edge. A$ 135

#9225 Nice early hand adze with hammer head, 65mm edge. A$ 125

#7897 Adze with full pole, a bit short on this one, 3 7/8" edge x 10" long. A$ 30

#1024 French. Signed "POITEVIN MACON." The cutting edge measures 7 inches across. 9 inch handle. Clean, sharp and ready to use. A$ 225

#5835 Pfor Hand adze, extra nice and clean, 4 3/4" edge nice original handle. A$ 155